News & Events > HELiOS 2022 SP2

HELiOS 2022 SP2

| Aktuelles | Software Updates

Le Service Pack 2 pour HELiOS 2022 est désormais disponible. Un point important d’amélioration a été encore l’amélioration de la fonctionnalité de dérivation. S’y est ajoutée la dérivation des projets et des classeurs sans contenu. Par exemple, il est possible désormais, via une fenêtre étendue, de sélectionner ou désélectionner en particulier des sous-projets ou des sous-classeurs de chaque structure. Une autre nouveauté est la possibilité de dériver des classes de tuyaux dans HiCAD Tuyauteries+Process avec un contenu, c’est-à-dire des sous-types de toutes les variantes ou seulement de certaines. Comme pour les projets et les classeurs, il est également possible d’influencer l’appartenance à un workflow.

En outre, le travail avec les unités de longueur a été encore étendu. Les paramètres d’édition en pouce et en pied, ainsi que la prise en compte de la catégorie de l’unité lors du copier-coller des valeurs de l’attribut sont des exemples de cette nouveauté. Et dans le domaine de la Multi-CAO, l’actualisation des lots se présente à partir du SP2 avec une fenêtre de dialogue indépendante et donc beaucoup plus pratique.

Highlights

HELiOS general / HELiOS Desktop

Derive projects and folders without content
The functionality for deriving projects or folders "without content" has been revised. If you want to create a copy of a project or a folder via a derivation without copying the content of the object (documents, articles, other objects), then after calling up Derive project, without content... or Derive Derive folder, without content... you have the option of selecting or deselecting individual sub-projects or sub-folders of the respective structure via an extended dialogue. You can make changes to master data (designations, responsible agents, etc.) in the dialogue in the input mask of each individual project or folder. And you can also adapt the Workflow of the underlying object at this point or assign a different one to the derivation.

Derive pipe class with content
As of SP2 a new function for pipe classes is available in the HELiOS Desktop: Derive pipe class .... Use this function to create a copy of the pipe class including all its sub-types. Variants can be taken over in their current state or can be derived and assigned to the new pipe class.

Output settings for inches and feet

  • If you work with inches and feet as length units in HELiOS, you have extended setting options to influence the display of the output in detail via a configuration dialogue for result list columns.
  • Combined decimal and fractional formats are also possible and you can manually set the accuracy of decimal places as well as the denominator of the fraction calculation.
  • On the General tab of the HELiOS Options dialogue window, you can also determine whether the length display for feet and inches is output according to the American or British standard.

Copy & Paste attribute values with unit category
When copying & pasting attribute values via the Clipboard, also from one application to another, e.g. from HELiOS to an ERP system or Word, unit categories of FLOAT attributes will be taken into account as follows:

  • Copy attribute value copies a value to the clipboard as it is displayed for you in the result list. I.e.: If the unit (e.g. cm or inches) is also displayed in the corresponding result list column, it is also copied.
  • When pasting into a target attribute with a different base unit using the Paste attribute value function, the value will then be converted accordingly.
  • If no unit was copied to the clipboard, the corresponding number is also interpreted in the standard display unit of the target attribute when it is pasted.

Open, with options: Open drawings in reduced mode
The options dialogue for reduced loading of HiCAD documents (.sza files) has been revised to match the standard you are used to from HiCAD.

HELiOS Multi-CAD general

Converter
When performing an export mapping, i.e. outputting attibute mappings from HELiOS to an interfaced CAD application, a Converter can be set not only globally, but also per "row" of a source attribute.

Batch update
As of SP2, the batch update is carried out via an independent dialogue.

  • You can call the combination search several times and gradually transfer search results to the dialogue.
  • Previously transferred search results can also be removed from the dialogue.
  • You can control whether only the selected documents are updated during the batch update or whether the substructures contained are also updated.
  • Updated documents are automatically checked in, but not removed from the workspace.

Derive projects and folders without content revised functionality (Kopie)

Derive pipe class with content


Output settings for inches and feet

Set converter for export mapping


Multi-CAD - Batch update

Retour

Mon compte ISD